Page 1 out of 2 Pages

• I am looking for a replacement HBW10, do you have any in stock?
  (1026 views)
• I need a seal and clutch kit for my HSW630VI 2.5.. Which one should I get?
  (962 views)
• ZF-63IV-2.5 Serial No.27312R P?N 3312003015 Engine 8.1GXI Volvo Penta year 2007. Both my transmissions have started to make a "rattling" sound when in or out of gear at idle speed. If I increase speed by 1.5 rpm the noise goes away. When I turn the key off engines will make a loud noise. Could you tell me what this might be and the replacement parts I would need. Would I need to replace transmission?
  (1693 views)
• I have an old Hurth gearbox hbw 100 or 125 (zf10m or zf12m) with a ratios of A=2.14 and B=1.95, the Nr is: 21-47197. Would you be able to confirm from that information if I have the ZF10M or ZF12M please. It is fitted to a single cylinder engine that turns the wrong way, as in when looking at the front of the engine the flywheel goes counter clockwise. Would it be possible to lower the ratios to something like A=1.5 and B=1.4, would you be able to supply the parts and guidance if for this. Could my gears be changed to make this work or do ZF make the gearboxes with a similar ratio?
  (1637 views)
• I ordered both a cable connection (part # 22769770) Volvo Penta HS45AE-C transmission but it is not compatible with the solenoid, yet Volvo and ZF is showing that is the correct part number. How do I find the correct connection or harness?
  (1346 views)
• Good evening I have an old Hurth gearbox hbw 100 or 125 (zf10m or zf12m) with a ratios of A=2.14 and B=1.95, the Nr is: 21-47197. Would you be able to confirm from that information if I have the ZF10M or ZF12M please. It is fitted to a single cylinder engine that turns the wrong way, as in when looking at the front of the engine the flywheel goes anti clockwise. The gearbox is currently working great and I have no problems with it, however.... Would it be possible to lower the ratios to something like A=1.5 and B=1.4, would you be able to supply the parts and guidance if for this. Could my gears be changed to make this work or do ZF make the gearboxes with a similar ratio, Many thanks Cheers Nick
  (1319 views)
• What is recommended as a coupler for 350 chevy with ZF45C gear?
  (945 views)
• Differences between the ZF45IV (ZF46IV) and the ZF48IV.
  (1795 views)
• Volvo 165 (1000 HP), ZF or Twin Disc Gear similar to ZF 550A Question
  (3258 views)
• ZF85 IV 2.0 Gear Question
  (2343 views)

11

one category up